current location:HOME >> Product >>

  • Seed dressing - corn
      MSR: 10ml US$6/ea  30ml US$12/ea
  • BRIEF introduction:

    This series of enhancer is to be mixed (dressing) with the seeds, and it will improve the rate and speed of the germination, new grow will be stronger and well developed root system. Induce more roots growth and increases the density of the stock, increase the ability to resist drought.

Product name:
Customer name: *
Address:
Email: *
Telephone:
Qty:
  Attached picture of farm (important): *
 
 
 

        Seed dressing series - growth enhancer for seed mixing applications

This series of enhancer is to be mixed (dressing) with the seeds, and it will improve the rate and

speed of the germination, new grow will be stronger and well developed root system. Induce more

 roots growth and increases the density of the stock, increase the ability to resist drought.

Increases the maize count per corn cob and weight of each “hundred count” (increase production).

         A. Application stage (plantation specified)

1. Dosages

a) Corn : Mix evenly 2.5Kg of corn seed with 10ml of the enhancer (for corn), no metal container or

               object,

               Wait for it to dry (should be within 15 minutes),

               Plant the seed as usual after it is dry (enhancer has been absorbed), plant within 2 hours

               since the enhancer is working after it has been absorbed  .

               Note : do not over apply. Use right after mixing.     

b) Wheat : Mix evenly 1Kg of wheat seed with 2ml of the enhancer (for wheat), no metal container

                 or object,

               Wait for it to dry (should be within 15 minutes),

               Plant the seed as usual after it is dry (enhancer has been absorbed), plant within 2 hours

               since the enhancer is working after it has been absorbed  .

               Note : do not over apply. Use right after mixing.     

c) Rice :

 First step: Make the pre-solution

Mix the trigger agent and growth enhancer evenly in the mixing bucket at the ratio of  

1:10 (1 part trigger agent to 10 part enhancer). no metal container or object,

Note: do not over apply. Use right after mixing.

Second step: pre-germination

Dilute and mix evenly the pre-solution which has been prepared with water at the ratio of    

1: 450 (1 part pre-solution to 450 part water), soak rice seed under 30°C for 24 hours for

 induced germination (pre-germination) ; plant as usual 

        Note: Use right after dilution.  Follow step sequence do not combine, do not over apply

 

d) Potato / Yam (tuber or root crop):

Enhancer will increase growth and resistant of environment, increase spout ratio. Increase the

commercial size ability and uniformity of product. 

 

1) Prepare the root or tuber for re-planning as usual (cut pieces with bud for re-planning) .

2) Slightly wet (damped) the cut pieces,

3) Mix 50kg of cut pieces with 500g of enhancer (powder), makes sure all cut pieces are covered

    evenly,

4) Plant the cut pieces as usual, after mixing.

Note: do not over apply; combine with spray series after spout for better effect.   

      

Additional general note :

·         Do Not contact with any metallic (metal) object.

 

·         All enhancer are cross and combine usable; follow the dosages, do not over apply.

 

·         Exception of the seed dressing (mixing) enhancer is plant specified.

 

·         Use Syringe (without needle) for accurate measurement, if the usages are not full packages, avoid

 contamination on the unused portion, seal the unused portion, do not contact with metallic material at any time.                           

 

·         Store any unused enhancer (or full packages) at dry, shaded area (keep in low temperature for best

 storage).

 

·         Non-toxic, no chemical content.     

 


We will response on your request. We don't spam, promise.